5 kW Melting unit with 1/1.5 Kg metal melting capacity (Depends on metals)
<10 KHZ as per design requirement (High frequency melting unit)
Input Power Supply: Single phase and 415V ± 5% , 3 Phase, 50/60 Hz
Most advance IGBT based inverter with microcontroller and LCD display for machine interface with having autoresonance design sensing and getting full power from start the machine (No power pot required only ON and OFF Push
Buttons)
Chiller required at optional base depends on Usage.
FEATURES :
Total Digital and most advance technology for micro-controlling circuits with all converter SCRs/Diodes and Inverter
IGBTs Safety and tripping circuits which have water Pressure / flow tripping and Temperature tripping sensors : Easy
Diagnostic and Fast Trouble Shooting with quick response Control system
0.98 and above Power factor
Operate with time reference / Operate with temp reference (Temperature sensor doesn’t give accurate temp. rating this only for reference)
Easy to operate and Low maintenance design
Clean and Silent operation unit with Minimum metal loss
Secondary-isolation series tank power circuit protection
Integral crucibles Pull out furnace system ( Push out furnace system on optional bases)
Very compact monobloc unit design
Silicon Carbide, Silicon Graphite, Clay Graphite and Pure Graphite crucibles : any one can be use
APPLICATION :
In Refineries of Precious Metals: Melting likes Gold, Silver, Platinum etc...
Ferrous and Non Ferrous Metals Alloys making for R&D or Small Lab Testing Furnace for taking result of alloy metals likes Coppers, Cast Iron and Steel Alloys or ETC....
Specially for Metal Powder and low dense materials (Smelting)
